13 ways to make a comfortable dog bed with your own hands

Key points to consider

Types of beds

To make your pet cozy and comfortable on the bed, when sewing it, think through every little detail:

1. The fabric for the sleeping place must be dense enough, otherwise the animal’s claws will quickly render it unusable. It should be easy to wash and dry quickly
2. For smooth-haired breeds, it is better to choose a fleecy material, for example, plush or velor. Dogs with thick hair will prefer a bed made of durable cotton, linen, tapestry or denim. A large animal will be quite comfortable on a carpet product. It’s hardly worth making a bedding for a decorative breed dog from this rough material.
3. It is not advisable to use synthetic fabric. It can accumulate static electricity and can trigger the development of allergies.
4. Observe how your pet sleeps and try to make a bed that is most comfortable for him. Large breeds like to rest with their paws extended forward, so make their sleeping place rectangular, with small sides. You can make a cozy bed for a small dog by raising the sides higher or make a foam house for such an animal
5. Foam rubber, padding polyester, and batting can be used as padding. Down or feather filling is not a good idea. After all, they can become a breeding ground for parasites and a place where microbes accumulate.
6. The animal will definitely pay attention to any hanging things, so there is no need to decorate its house with bows and beads. There is a high probability that the dog will chew them off and then swallow them
7. Decide right away where your pet will rest. For these purposes, choose a corner that is maximally protected from drafts. In the future, it is highly undesirable to move litter from place to place.
8. Small breeds of dogs often freeze even at home. It is better to arrange a sleeping place for them on a small stand
9. Housing for an animal should not be located in a walk-through area
10. Try to ensure that your pet can see you while resting. Believe me, this is very important for him
11. Be sure to periodically treat the litter with antiparasitic agents.

It is better to put a removable pillow or bedding in the animal's bed. In this case, you can easily wash them at any time. You can make a pair of removable pillows from the same or contrasting fabric.

DIY dog bed: what you need and where to start

What will you need and where to start if you decide to make a dog bed with your own hands? First of all, you need to think through all the nuances so that your efforts are not in vain.

A dog bed is:

• Resting-place.
• A place where the dog can warm up and calm down.
• A place where the puppy can hide food supplies.
• A place where the dog can hide toys or things that he considers his own.
• A breeding ground for parasites and bacteria.

Almost all industrial dog beds are covered with nylon or fabric, which is 60-80% synthetic. This is why pet store products have an unpleasant odor. In addition, there is a considerable chance that the coloring of an industrial lounger will be short-lived or allergenic.

Important! The dog's resting place should not cause harm to it. To make the lounger and cover, it is necessary to use fabrics that do not accumulate static tension and do not irritate the skin. The optimal choice is cotton, satin and linen.

To prevent your pet from cluttering up the bed with its toys and other trophies, it is better to place a special basket (box) next to it. By regularly putting toys in the basket, you let your dog know that they are always available. Over time, the four-legged dog will understand that the toys that are in the basket are safe and will stop hiding them under the mattress of the lounger.

Most likely, you will not be able to “convince” your dog not to hide food on the bed or under the mattress. The pet's thrifty behavior can lead to contamination of the cover, which will contribute to the rapid proliferation of bacteria. In addition, when returning from a walk, your pet can bring fleas, which will happily make nests in the folds of the fabric. By making a removable cover that can be washed and ironed, you will prevent many health problems for your pet.

Large or small – how to correctly determine the size of a sun lounger?

How to correctly determine the size of a bed if your pet is still a puppy. How to guess so that the manufactured lounger does not turn out to be big or small in the future? There is no answer to this question. You can focus on general dimensions: large, medium or small dog.

The general requirements are as follows: when entering the bed, the dog must be able to freely turn around and lie down with its paws extended (stretch).

In practice, it turns out that if your puppy is medium or large, the bed will turn out to be simply huge and take up a lot of space. However, there are nuances here too, depending on the position in which your pet is comfortable sleeping.

If you cannot determine the size of your dog when it grows up, it is better to wait to make a bed. As a temporary option, you can use a cardboard box in which a child's cotton mattress is placed.

The mattress can be folded to form sides, and the cardboard box serves only as a frame. As your puppy grows, you can change the size of the bed. When your pet reaches 7-8 months of age, its adult dimensions will be clear, which will make it possible to make a stronger and more durable bed.

Round or rectangular - how to choose the shape of a lounger

How to choose the optimal shape? To answer this question, just watch your pet sleep when the house is hot and cool. Usually, when a dog is cool, it sleeps curled up in a ball. When the pet is warm and comfortable, it spreads its legs and sleeps on its side. Practice shows that sleep position can be influenced by breed or physiological characteristics.

• Dogs with long legs rarely sleep in a ball, so a rectangular bed is more suitable for them. This shape is suitable for large pets and dogs with elongated bodies.

• The round bed is suitable for small dogs who tend to freeze even in warm weather. Few people know that the smaller the pet, the faster its metabolism, so it spends more energy on heating its own body and freezes more often.

The problem of pet discomfort can be solved not only by the shape of the bed, but by its location. For your dog to rest, it is better to choose a separate room that is free from drafts. The lounger should not be placed near windows or heating appliances. When the windows are open, the dog will sleep in a draft. In winter, the heat emanating from heating devices dries the air, and with it the wool.

For short-haired dogs that are not resistant to cold, it is better to make a bed that can be placed on a platform. You can use a homemade pallet as a platform. To protect the lounger from drafts, it can be placed in a bedside table, the bottom section of a closet or other protected space.

Lounger with sides or open

Why is it better to make a sun lounger with sides? Most dogs feel more comfortable when their back rests against something while they sleep. This feeling is reflexive, since wild dogs sleep in lowlands or under rocks to hide from the eyes of competitors and larger predators.

A bed with sides is the best choice for small and medium-sized dogs. Large and gigantic four-legged animals may not appreciate the imposed comforts, since the sides make it difficult to spread their paws while sleeping.

Remember! A bed with sides is not the best choice for older dogs that suffer from joint pain.

Having settled on a model with sides, you are faced with another choice - soft or hard. Soft sides are more comfortable, hard ones are easier to clean.

Stores sell special frames that look like plastic basins with a flexible side. This frame is designed to fit a suitable sized mattress. The result is a bed with flexible, rigid sides and a soft base. This model of lounger is considered the most hygienic, since the mattress is easy to replace and the frame can be washed.

Knitted or fabric?

To keep the lounger warm, you need to use natural fabrics as upholstery. Trying to ensure maximum comfort for the pet, owners believe that it is better to make a cover for the bed knitted from wool.

In fact, wool is one of the most allergenic materials. As an alternative, it is better to use an old blanket, blanket, or sweater. Fabrics should be non-static and pleasant to the touch.

If the material from which the bed is made accumulates static electricity, the dog will receive light electrical discharges when it comes into contact with the resting place. This may cause the dog to avoid the bed.

Square bed with sides

Square bed with sides

Of course, you can buy a dog bed at your local pet store or online store. But it’s still better to make it yourself. In this case, you can not only choose the color of the material that perfectly matches the interior of the room, but also make the product exactly according to the size of the animal.

Structurally, a square bed is quite simple, and you will need a minimum of time to make it. Products with sides that serve to protect against drafts are more comfortable and are used more often.

Required materials

Bed with sides

So, we present to you a master class on the step-by-step production of a bed for a dog or cat.

You will need:

• dense fabric : for a small dog it is enough to choose a piece of material measuring 1.0 x 0.8 m or a little larger
• foam rubber or synthetic padding for stuffing
• paper for a pattern : if you want to get a neat product exactly according to the size of the animal, you should not rely on chance and cut out the product “by eye”
• a ruler and pencil for drawing a pattern on paper, as well as chalk or a piece of dry soap for transferring the pattern onto the fabric
• cutting scissors
• fairly thick threads and a sewing machine or regular sewing needle

Most fabrics shrink after washing. Therefore, it makes sense to pre-soak the fabric, dry it, iron it, and only then start sewing. Otherwise, the stuffing in the shriveled cover will collect in clumps.

Making a pattern

Sample pattern

Let's proceed to the most important stage of work - I will reveal:

1. First you need to decide on the size of the bed. Its length should be equal to the length of the animal with its front legs extended
2. You will need to cut out two pieces. They will have the shape of a square (see photo) with adjacent sides. Don't forget to leave seam allowances. Make them a little larger, at least 2-3 cm
3. If you plan to insert elastic along the edge of the lounger, measure another 3-4 cm along the edges of the sides for hemming
4. Lay out the paper for the pattern, use a pencil and ruler to draw the outline of the parts onto it
5. We call our dog and lay him on the workpiece, checking if we have made a mistake in the size
6. If we are completely satisfied with the size of the future product, we apply the pattern to the fabric and outline it with chalk
7. Cut both pieces with scissors

Sew the product

Sewing a square bed

To ensure that the bed lasts longer and the edges of the fabric do not fray, process the edges of the workpieces using an overlocker. Let's start sewing the product:

1. The dog bed will turn out more neat if you are not lazy and first fasten the seams with straight stitches with a regular needle, and only then start sewing
2. When connecting parts, be sure to leave space for inserting foam rubber or padding polyester
3. After inserting the filler into the bottom and sides, we finally sew up the edges of the product
4. We make an entrance by pulling the center of one of the sides with a strip of fabric. Although the entrance hole can be cut out in advance
5. If desired, insert an elastic band into the edges of the sides in a pre-prepared fold
6. You can also fasten the sides together using thin strips of fabric or braid (see photo). You will need 8 of them - one for each edge of the side. Just keep in mind that most dogs really like to ruffle strings and laces that catch their eye with their teeth. It is quite possible that such a mount will become unusable over time.

It is better to assemble the sides of a bed for a large animal from several pads. Due to the larger number of seams, they will be stronger and will caking less.

Bed house

Pattern of a bed-house

For a small dog, a sense of security is very important. Therefore, a sleeping place in the form of a house would be an ideal option for him.

Let us describe in detail how to sew a dog bed in the shape of a house:

1. The length of the product must be equal to the length of the animal plus 10 cm
2. The width of the entrance (hole) to the house is wider than the animal’s chest plus 5 cm
3. The animal must be placed in its home at full height. Therefore, also measure the height of your pet to the withers. This will be the height of the walls (the height of the roof is not taken into account). It is better to make a house without a sloping roof a little higher - so that its height is equal to the height of the dog to the tips of the ears
4. When cutting, do not forget to set aside 2-3 cm on the sides for seam allowance
5. The walls, floor, roof and ceiling can be made from a single piece of fabric of a suitable size (see photo of the pattern). The back and front walls with the entrance are cut out separately
6. Cut two rectangles of the same size and sew them together
7. Mark and stitch the lines dividing the roof from the wall, the wall from the floor, etc. Be sure to leave a little space for stuffing them with filler.
8. Insert foam into each of the resulting compartments, and then sew up these holes

At first, your pet may be wary of the house-bed. To help him get used to his new home faster, put a treat or favorite toy inside.

Making a bed from old clothes

Yes, we remember how you forced the dog to lie on old clothes. But, if you're so drawn to the leftovers from your wardrobe, why not turn them into a stylish and much more comfortable lounger? We offer you another, very simple, master class on sewing a place for a dog with your own hands.

Step-by-step instruction

The tools are still the same. Everything is quite simple with the materials. No patterns are needed, just some old clothes of large or small sizes, depending on the size of the pet. Let's say you decide to do some magic on your sweater.

• if the sweater is without a collar, simply sew the garment at the top; if there is a neckline, cut it off and sew the jacket;
• Next, work on the sleeves - sew them from one to the other so that an arc is formed;
• sacrifice two pillows, gut one of them;
• insert the whole pillow into the sweater and sew up the bottom of the sweater;
• Fill the sleeves with the contents of the other pillow and sew them together.

That's all - the chair from an old sweater is ready. You probably have a lot of unnecessary clothes, and you also have pillows of different sizes. Thus, it is possible to make beds for dogs of any breed – even very large ones.

A dog bed is a place where the animal feels comfortable and cozy. On the Internet and pet stores there are many options for houses and pillows for resting four-legged pets. Many housewives independently sew an original design for their pet.

How to make dog beds with your own hands? What material should I choose for the base and sides? What shape of the “nest” will be most comfortable? How to choose the optimal type of structure? Answers and useful tips in the article.

Donate an old sweater

Dog bed made from an old sweater

If you have an old sweater made of thick knitwear in your house (a sweatshirt is ideal), you can make an inexpensive bed for your dog from it. This bedding will be especially dear to your pet - because even after a couple of washes it will retain your scent. It is better not to use products with weak knitting - under the influence of the animal’s claws they will quickly lose their shape and turn into rags.

Making a dog bed from an old sweater is easy. For this it is enough:

1. Make a seam from one armpit to the other. This way you will divide the sweater into 2 parts. The large one, the bottom one, will become the bottom, and the sleeves and part of the chest will turn into sides
2. We insert a small pillow or padding polyester into the lower part. Fill the top part in the same way.
3. Don’t skimp on the filling - try to stuff the sides as tightly as possible so that they don’t deform under the weight of the animal.
4. Tighten with lace or sew the bottom of the product. For ease of washing, you can insert small zippers into the bottom and neck of the sweater
5. Sew up the neck
6. We sew both sleeves together, thus forming a “tunnel”
7. We fix it along the edges of the pillow in the form of sides

A bed with a removable cover is much more convenient. It can be removed and washed at any time. To make your pet feel comfortable at any time of the year, make two of these covers at once. The first, winter, is made of warm fabric, and the second is made of cotton or linen.

DIY sweatshirt lounger

If you have a small dog and have an old sweatshirt and a small pillow at home, then you can easily turn it into a pet bed in half an hour. Let's see how to do this.

Step 1 . First, prepare your materials. In addition to a sweatshirt and a pillow, you need needles, threads, scissors, and a piece of fabric to cover the junctions of the sleeves.

Tools and materials for work

Step 2 . Next, turn the clothes inside out and then sew the collar, but leave a small hole.

The collar is being sewn

Step 3 . Straighten the jacket and draw a straight line from one armpit to the other. Pin the sweatshirt along this line.

Pins along the marked line

Step 4 . Now sew the sleeves of the sweatshirt to the sides, but just short of the bottom of the sweater. These are the future sides.

Sleeves are sewn to the sides

Step 5 . Now fill the sides with soft filling. By the way, you can use an old blanket.

The sides are filled with filler

Step 6 . Inside the “body” of the sweatshirt - in the future this will be the bottom of the bed - insert a small pillow. You can sew it yourself.

A pillow fits inside

Step 7 . Sew the bottom edge of the sweatshirt, “sealing” the pillow inside.

Bottom edge is sewn up

Step 8 . Sew the sleeve cuffs together.

Sleeves are sewn

Step 9 . Wrap a piece of decorative fabric around the cuffs and sew it shut to hide the appearance of the cuffs.

A piece of decorative fabric is used

Step 10 . This is such a cute bed. It’s very easy to make and you don’t even need to own a sewing machine to make it work.

DIY sweatshirt lounger

Video - DIY dog bed from an old jacket

Round bed

Pattern of a round dog bed

The principle of its manufacture is similar to the previous one. The only difference will be in the form of details:

1. First you need to prepare a pattern for a round dog bed
2. The diameter of the workpiece will be equal to the length of the pet plus 25-30 cm for the sides. You need to add 2-3 cm to this figure for hemming the fabric, as well as 4-5 cm for inserting an elastic band
3. Using the pattern, cut out two identical parts in the form of circles
4. On one of them we mark the bottom of the bed in the form of a small circle located in the center. We also mark the location of the segments with chalk (eight will be enough)
5. Sew the central circle, leaving a small gap for padding padding polyester or foam rubber
6. We insert the filler into the bottom of the bed and finally sew it up
7. We sew the segments and the second circle, also leaving holes for stuffing the sides
8. Fill them tightly with filler. Sew up the remaining hole
9. Preparing the seam for inserting the elastic
10. Insert braid or elastic. We tighten them in such a way as to raise the sides
11. Let us repeat once again that we are against any small decor in the form of beads, buttons and bows. You don't want your pet to choke one day trying to chew them off.
12. We place the bed in the chosen place and invite the animal to try it out.

Puppies grow quite quickly, so it’s not worth sewing them a personal bed right away - they will quickly grow out of it. To make your baby feel protected, at first give him a place in a cardboard box and put a mattress in it.

Types of dog beds + photos

The shape of the bed can be different . The configuration of the place depends, first of all, on the location in the room - square, oval, rectangular or pentagon-shaped. A large dog bed is usually rectangular in shape. Owners often make a dog bed out of a children's mattress. This is the perfect base for a dog bed. All that remains is to create a side for it to separate it from the wall.

A typical use of a children's mattress as a base:

And here’s how you can get a cozy place for two from the same children’s mattress:

A more complex option using the owner’s skill in working with wood is a real sofa for a pet with the same children’s mattress at the base:

Often, sun loungers are created using synthetic padding or foam rubber at the base of the seat . Oval lounger made of thick fabric with synthetic padding interiors:

The photo shows the moment of assembling a round bed with a foam base and foam sides for a small dog. But using the same principle, you can create a bed for a large dog, only much more material will be needed:

Wooden for large dogs

Blanks for wooden stock

It doesn’t always make sense to make regular beds for large dogs with sides filled with filler. Under the weight of the animal, such sides will quickly flatten and the bed will lose its shape. In this case, it makes sense to make a bed on a rigid wooden frame or make it in the form of a small crib.

So, let's describe how to make a wooden dog bed:

1. Knock down the side walls and bottom of the product in the form of shields of a suitable size
2. To prevent a hangnail from accidentally getting under an animal’s claw, sand each part well before assembling the product.
3. If you don’t have boards of a suitable size on hand, you can use old pallets. They are disassembled into individual components, thoroughly sanded, and then sawed into boards of suitable size.
4. The nails will loosen too quickly and may injure the animal. Use self-tapping screws for assembly, pre-drilling slightly smaller holes in the wood. Be sure to slightly deepen the heads of the fasteners into the wood so that the animal does not cling to them
5. To make the product stronger, use small metal corners for assembly.
6. You can attach a small bedside table to the wooden frame in which toys for your pet will be stored.
7. To make it easy to move the bed from place to place, attach wheels to its bottom. You can buy them at a furniture store

Wooden dog beds

When choosing fabric for a mattress, keep in mind that material that is too light will have to be washed often, and wool will be clearly visible on dark material. Use fabric with a small print to sew the cover - faded wool on it will be less noticeable, and you will not have to vacuum the litter as often.

Unusual decor of cozy dog ​​beds

We bring to your attention some interesting ideas for creating a personal space for your pet. By modernizing the proposed options, you can also create cat beds with your own hands quickly and inexpensively.

• Place a pillow in a wicker basket and weave decor into the walls. If desired, you can cut cardboard around the perimeter of the basket, cover it with foam rubber and cover it with bright fabric. This removable “protection” insulates the basket and can be easily washed.

• From the bedside table you can create a cozy place for your pet. Just take out the drawers and place a pillow or piece of fur coat inside.
• If you have an old monitor or TV, then you can arrange a place for your pet by taking a fresh look at the equipment. Remove the insides, leaving the frame. Cover the inside with foam rubber and place a pillow. This option is suitable for small females and males, and can be considered as a temporary shelter for a small puppy.

• A hammock made of a folding cross and a blanket stretched over it. This mobile option is suitable for a small dog or bitch.

• In an old suitcase, replace the worn-out lining with a new one, more suitable for the modern design of the apartment. Place a soft pillow inside, and put toys in the pockets or come up with any other decor.

• An unnecessary wooden box will make the perfect dog bed. Drive in all the protruding nails, remove a couple of boards from the future front side, and paint the surface with the desired acrylic paints.

Attach legs to the bottom from the outside, which can be cut out or bought at a hardware store. Place a pillow inside and write your pet's name.

• Everyone definitely has an old sweater, cardigan or golf shirt in their closet. They can also be used for work. Sew up the neck of the jacket, and then sew the openings of the sleeves so that an arc is formed. Fill with filler, then lay the sleeves as sides and baste. Sew the product.

• Many types of furniture are suitable for creativity. You can remove the drawers from the old chest of drawers, paint the base and give your pet a soft pillow or even hang a curtain.
• For a large dog, secure and then sew two pillows using a homemade sewn pillowcase.

That's all, a cozy rookery for a cute puppy or a faithful adult dog is ready. Surely apartment residents will appreciate the purchased item not only from the point of view of comfort, but also from the aesthetic side.

Plywood booth

Plywood booth

A small plywood kennel can be placed in the house. In order not to bother with making a roof, you can make the product in the form of an ordinary box with an opening for entry. But a house with a gable roof will, of course, look much more interesting.

Booth with a gable roof

1. You will need 6 plywood blanks - 4 for the walls, 2 for the roof and floor. You can cut them with a regular or electric jigsaw.
2. We clean the cut areas well with sandpaper.
3. We connect the parts with wood glue and additionally fasten them with screws
4. The dog's home will look more decorative if it is painted with wood stain. Plus, this coating will protect the plywood from rapid wear.
5. If desired, you can install the finished product on low furniture legs
6. The booth house is ready to welcome residents

Plywood bed with legs

To make your pet a real royal bed, you will need a sheet of plywood, several boards, stable metal legs and fasteners. Assemble a box from plywood with boards using self-tapping screws, or immediately take a ready-made pallet. Screw the legs, carefully sand the entire structure, prime and paint on top.

All you have to do is put a suitable size pillow inside - and your dog’s bed is ready! You can complement it with a toy box or decorate it with letters, laying out the name of your pet. To make your pet's sleeping place mobile, use wheels instead of legs.

Bedding for large dogs in the form of a mattress

Mattress with sides

A large dog needs a lot of space to rest. Such animals often sleep with their paws extended to the side or forward. There may not be enough space for them on standard bedding. Therefore, it is better for them to make a dog bed in the form of a mattress.

For convenience, you can also make sides, but they are placed only along the back and side walls:

1. To work, you will need a decent-sized piece of foam rubber and thick fabric for sewing the cover. It is better to make it removable so that the fabric can be washed at any time
2. To sew a cover, it is enough to fasten two large fabrics together, leaving a hole for inserting the filler. You can complicate the task and sew rectangular inserts on the sides equal to the height of the stuffing
3. By sewing a zipper into one of the sides, you will get a circuit cover that will be convenient to wash
4. Foam rubber cakes over time, so it is better to lay it in several layers
5. All that remains is to make the sidewalls. To do this, we sew a cover in the form of a long pipe, insert foam rubber into it and finally sew up the holes. Insert a zipper into one side
6. We sew the resulting side by hand to the back and sides of the mattress. It is not worth making sides around the perimeter of the entire bed - under the weight of a large dog they will quickly become compressed and lose their attractive appearance
7. Bed for a large dog is ready
8. This mattress can be placed on a wooden stand with low legs, thus creating a cozy crib.

A bed for all occasions

The presentation of any educational material is usually carried out from simple to complex. And we’ll start with a soft transforming bed: sewing it is even easier than the simple sewn ones described below.

The pattern and appearance of a Spanish-designed transformable dog bed is shown in Fig. Dimensions are given without allowance for processing, see below.

Pattern and appearance of a transforming dog bed

The advantages of this bed are as follows:

1. The dimensions can be changed proportionally according to the size of the dog;
2. With all the sides raised, this bed is suitable for puppies and small playful lap dogs;
3. By folding back the front and, possibly, one of the side sides, the transformable bed can be adapted to any favorite sleeping position of a dog of any size, except giant;
4. A transforming bed is placed on a wooden bed for a large dog in the same way as a regular bed;
5. When folded, the transformable dog bed can be taken with you in your luggage if your dog accompanies you on a trip.

Original ideas

Booth from a nightstand

In principle, a pet bed can have any geometric shape: it can be made not only in the form of a circle, rectangle or square, but also a pentagon or polygon. But still, you shouldn’t think too much - wool and debris will constantly accumulate in numerous corners, which will be problematic to remove. And such a design will take up much more space.

A variety of materials can be used as a frame for a sleeping bed for a dog:

Booth from a nightstand

• for a medium-sized animal, an old suitcase with bedding placed inside is ideal
• a small dog can be placed in a small basket
• turn over the old table and saw off its legs - and you will get an original wooden bed for your pet
• you can use a bedside table for these purposes if you remove a couple of bottom drawers from it
• You can get a real house if you cut out an entrance for the dog in the side table and put soft bedding inside the new home; so that the entrance to the home is not too conspicuous, it can be curtained with a decorative curtain made of thick cotton or linen
• when replacing furniture, do not throw away table or chest of drawers - they will make a ready-made sleeping bed for an animal; You just need to lay a mattress on the bottom
• “place” your pet on the bottom shelf of a closed coffee table - the dog will only be happy to be close to you
• You can also use an old ottoman with a hole made on one side for a manhole.
• if you unscrew the legs from an old office chair or a regular chair with armrests, you can get another original look for a dog bed
• Have you had an old baby bath lying around for a long time? you can easily use it as a sleeping place for your pet
• your dog will definitely love a bed crocheted from thick yarn

Required tools and materials

The finished bedding can be an old mattress. However, this is not the most practical option, since dogs have a habit of tearing tissue with their teeth, but it all depends on the character of the pet. For the same reason, you should not use rags to insulate the booth. Moreover, in winter, when the dog lays his fur on them, the material will absorb moisture from the snow.

The following fillers can be used as flooring:

• hay;
• shavings;
• felt;
• mineral wool.

In addition, for work you will need:

• scissors;
• nails;
• plane.

Ready beds

Ready beds

If you don't want to bother making a bed for your dog, you can simply buy one. The price of a dog bed depends not only on the material used, but also on the size of the product. The range of such beds is quite large. Manufacturers often use buckwheat husks to stuff a sleeping bed for an animal, which is very convenient - it does not harbor insects.

The author of the following video suggests making an original pet bed in the form of a tightly stuffed pillow. You can clearly see each of the manufacturing stages by following the link: