DIY shoes for Chihuahuas

Total Today: 4

With the help of this wonderful video from dog blogger Darina, you can learn how to easily and quickly sew boots and socks for your dog with your own hands. We warn you that such products are short-lived, for a maximum of a week of daily walks twice a day. However, in the absence of the opportunity to buy boots for the dog, this option is quite suitable. It's better to wear them in dry weather, as they get wet.

However, Darina gives one very good advice on how to make such boots waterproof. However, this also does not last long.

Here is the word from Darina herself

Hello everyone, friends, I’m Darina. If you are watching this video now, then you are either the happy owner of such a shaggy tailed pet, or you just really love doggies. In any case, today's video will be very useful for all dog lovers. We will make homemade socks for dogs with our own hands, as well as very cool boots for walking outside.

Actually, I'm not a big fan of shoes for dogs, because I think they are only needed in some extreme cases. For example, if there is very severe frost, and the dog can freeze its paws. My Jack Russells don't fit any shoes at all. Everything goes away very quickly - they are too frisky. I believe that it is a personal matter for each dog owner whether to wear shoes for her or not.

However, there are times when socks for dogs or boots for walking are not a whim, but a real necessity. Paw injuries: Unfortunately, my dogs quite often tear their nails until they bleed or injure the pads on their paws during frantic play or walking in the dark. This often happens to my dog ​​Lisa.

I told you on Instagram just recently that after a walk in the new dog park, Lisa injured the pads on her paws. There was bad coverage on the site. Therefore, we were treated at home for a whole week. I bought her socks, applied a sponge with ointment and put a sock on top. This is very convenient; you don’t need to wrap your paw in bandages. However, our socks are already old, it’s time to update them, otherwise you can’t go outside in these - they’ll get wet in a second. I decided not to buy new socks, but to make them myself. Moreover, they are made quite simply and quickly.

I will show you today the easiest and coolest option. Then I'll show you how to use these socks to make boots for walking outside. You can walk in them in rain and mud.

DIY dog shoes

During the cold season, not only people need protection from frost. Our smaller brothers also need it. This is especially true for dogs. While there is a popular belief that animals can run in the snow without harming their health, sensitive paw pads may crack from the cold. This will cause discomfort for your pet. Dog shoes will help to cope with this problem. Of course, it can be purchased at a specialized store, but it will not always be convenient and of high quality. It is much easier to build this thing with your own hands. Let's consider what is required for this and how to carry out this process.

What should dog shoes be like?

To ensure that your pet does not experience discomfort when wearing shoes, you should pay attention to the following criteria when creating them.

Shoe requirements

• Material characteristics . It should be a non-rough and non-slip fabric.
• Measurements taken separately from the front and hind limbs.
• The seams of the product must be made from the outside.
• The type of fastener should be tightening. But at the same time, it should not squeeze the blood vessels in the paw.

How to train a dog to wear shoes

In addition, it is worth gradually accustoming the animal to wearing shoes. To do this, follow the steps below.

• The sooner you start accustoming your pet to this item, the better. The ideal age for this is five months.
• The first lesson should take place at home, for a short time. At the first stage, a couple of minutes is enough. Then you can increase the bottom time with each workout.
• When training for the first time, wear only the front pair of paws..
• Don't forget to reward your dog with a tasty treat after finishing training.
• For initial lessons, choose lightweight product options.

Attention! It is worth moving on to street exercises only when the dog stops showing any reaction to the shoes being put on.

How to train a dog to wear shoes

Shoes and clothing for Chihuahuas or large dogs are a stress factor. It is better to accustom your pet to necessary but inconvenient objects from puppyhood. When dressing for a walk, the animal will quickly associate unpleasant sensations with the subsequent pleasant period and will not perceive the requirement to put on booties as an attack on its freedom.

If the dog was not accustomed to shoes in time, then it is better to start at home. First, the dog tries to rip off the disturbing objects from his paws. The owner must distract the pet by offering a game. The joy of communication will soon displace unpleasant sensations. When the dog stops taking off his shoes, you can take him outside, creating a reflex that connects the shoes with the walk.

How to sew boots

The most difficult thing is to make beautiful boots for your pet. But with due diligence, independent work is quite feasible.

To work you will need thick fabric and fasteners.

Completing of the work

• Take measurements and adjust the proposed pattern according to them.

• Using a pattern, cut out parts of the product from the material.
• Sew a strip closed in a ring to the sole in a circle.
• Sew the front upper part to the lower structure.
• We sew the boot part with the open side forward, to the front element and the circular strip.
• Sew a strip under the open edge.
• We install the fixing elements in place: Velcro, ties, and so on.
• Now you can go for a walk.

Comfortable boots for any weather

If you sew from thick leather with a lining, you get warm winter boots with a high top. But the pattern is also suitable for sewing nylon raincoats.

Compare the drawing with the photo below - it will become clearer what’s what. Detail 1 – a sole with a slightly cut heel (the heel is not round, but almost straight). Part 2 – the top of the boot, covering the foot to the beginning of the metacarpus (to the place where the boot begins, i.e. the entire top). Part 3 gives additional space inside the boot - its width is equal to the height of the foot from the floor to the joint, and its length is equal to the circumference of the sole. Part 4 folded into a cylinder is the boot (the height is at your discretion, but low boots hold up worse).

• sew the strip (item 3 in the figure and photo) to the sole (1), in a circle;

• sew the upper part of the boot (2) to the front strip, not all the way;

• the bootleg (4th part) remains open and is not sewn. Sew the bottom of the boot (the back fold) to the strip behind the heel and to the top of the boot in front. The edges of the boot remain free and open - this makes it easier to put on and take off shoes. To prevent the paws from getting wet and freezing, on one side of the boot you need to sew a shelf (5 in the picture) - a strip of fabric, like under the zipper on trousers.

• We try on the shoe and find a place just above the joint, just above the foot. Here you need to sew a pair of drawstrings (loops made of strips of fabric) to the boot, through which the Velcro tape will pass. We simply wrap the tape around the metacarpus and tighten it a little (so that the boot does not fall off, but also does not squeeze the paw). If you make two rows of Velcro, the dog will happily splash through the mud without noticing the bad weather: such shoes do not slip, do not twist, and do not change the position of their paws.

Slippers and boots

In order to sew them, you should cut out a sole from thick fabric or thin leather to the size of your paw. Sew the upper part of the stocking, cut from thinner fabric, to the sole. The height of the stockings on the hind legs should be several centimeters (depending on the size of the dog) above the hock joint. Two Velcro fasteners are sewn to the stocking: one directly above the toes, and the second above the hock joint.

Outdoor shoes are sewn in exactly the same way as indoor “stockings”, only a more durable and non-slip material is chosen for the sole, for example thick leather or rubberized fabric. The upper part of outdoor shoes for dogs is made of waterproof material. The boots are equipped with clasps above the toes and above the bend of the wrist joint.

Socks

Socks for dogs are made of thin knitted fabric. For example, if you have old socks that you won't wear anymore, cut them in half lengthwise and cut out the socks for your pet.

Uncover

1. Part 1 – sole.

2. Part 2—Side part (2 pcs.)

Seam allowances are 0.5 cm.

Sew the seams on the side edges of the socks. We recommend making the seams facing outwards, as this will reduce the likelihood that they will rub the dog's paws.

Then make darts on the sole and stitch it to the top piece.

Fold the top edge of the socks inward and hem them on the arms. By the way, to prevent the socks from falling off, you can insert an elastic band or lace that will hold them in place. If you want to decorate your socks, you should limit yourself to embroidery only, and even then the embroidery should be flat so that the socks do not rub your paws.

Boots

Boots for dogs are made of artificial and real leather or strong waterproof fabric with insulation.

You will need

Leather. Insulation, lining fabric. Iron loops. Laces, sewing threads.

Uncover

1. Part 1 - sole: 2 pcs. leather. 2 pcs. made of insulation, 2 pcs. from lining fabric. 2. Part 2 – side: 4 pcs. made of leather, 4 pcs. made of insulation, 4 pcs. from lining fabric. 3. Part 3 – tongue: 2 pcs. leather. 4. Part 4 – spout: 1 pc. leather. Seam allowances - 0.5 cm.

Performance

Make darts on the nose, stitching them twice for greater strength. At the ends of the darts, tie the threads with a double knot. In this case, they will not unravel.

Stitch the nose and tongue. Put together the parts of the sole made of leather, insulation and lining fabric, stitch along the edges. Do the same with the side parts. Sew metal loops onto the sides, into which the lace will then be threaded. Carefully stitch the side pieces to the spout.

Now sew on the sole. By the way, the sole can be made rigid—to do this, place either a piece of fiberboard or a piece cut from an old sole between the leather and the insulation. Hard soles are only recommended for large dogs as they are very tiring on the paws.

Materials taken from the site dimon-camon.ru/poleznye_veschi/19738/page/1/

You will need

• - crochet hook;
• - wool threads;
• - linen elastic;
• - tape measure;
• - leather flap for the sole.

Instructions

Decide what kind of shoes your dog needs. You can knit slippers - they are just above the wrist joint. This model is suitable for long-haired breeds. Smooth-haired dogs will prefer high boots, equipped with two fasteners for secure fixation.

Take your pet's measurements. Place his paw on a piece of paper and trace the outline - this is the silhouette of the future sole. Measure the length of the paw from the ground to the wrist joint, as well as its width. Write down all data.

Make a sample for calculation. Cast on 10 chain stitches and knit 10 rows with single crochets. Measure the resulting length and calculate the number of loops in one centimeter. Multiply the resulting figure by the width of your pet's paw, adding half a centimeter for a loose fit.

Knit a chain of the required number of air loops and close it into a ring. This is a blank for the boot top. Work in single crochet stitches to desired length. When finished, secure the last loop with a knot.

Make a circle-shaped sole. Tie three air loops and close them into a ring. In the next row, expand the circle by knitting two single crochets from each loop. Increase the third row according to the picture. Make sure that the sole does not move in waves. Constantly measure it, comparing it with the dog's paw pattern. Having knitted to the desired size, place the boot shaft blank to the sole and connect the parts to each other using single crochets. The scar of the seam should be on the outside - this way it will not rub the dog’s paws. Knit three more boots using the same method.

If you plan to walk in wet weather, sew leather soles to knitted boots. Cut out the blank according to the outline of the dog's paw and sew it to the bottom of the boot with a thick needle. To keep the shoes on your feet, thread the laces through the top edge and tie them. An elastic band threaded through the drawstring will secure the shoes more tightly. The higher the boot, the more securely it is attached to the paw.

You love your dog very much and want its paws to always be warm, then this article is for you. You can buy boots for dogs at any pet store, but it is much cheaper to make them yourself.

[Hide]

The Internet provides access to a large number of videos on how to make shoes for dogs.

Let's figure out what you need to know about shoes for our little brothers:

1. Measurements must be taken from the front and hind legs. Some believe that only two paws are enough, but experts recommend taking measurements from all four.
2. Shoes should not be slippery, scratchy or simply uncomfortable for your pet. It is better to make shoes that are loose, that is, with sufficient margin.
3. Properly selected materials are the key to success. Here the main criteria were a non-smooth sole, slightly stretchable fabric under the base and tightening fasteners.
4. Fender seams. It is better to use external design of the seams, then they will not be able to rub their paws.
5. When sewing, take measurements correctly. The finished shoes should be comfortable for the pet, that is, not fall off, do not put pressure, the soles are in place, the toes point forward.

Remember that even people have health problems when wearing the wrong shoes. Dogs are also not immune to this, which is why it is better to make boots for dogs with your own hands; you can always alter them, making them more convenient for use, as, for example, in the photo.

Sorry, there are no surveys available at this time.

How to make shoes for a dog with your own hands

Pet supply stores today offer a huge selection of accessories for dogs and cats, as well as clothing for them. It’s good when material opportunities allow you to purchase finished products, but what to do if this is not possible? Buying something by eye is not an option, especially when it comes to shoes. If you don’t get the size right, the money will simply be thrown away, and the dog will freeze in bad weather. In addition, finding a size that suits your pet can be quite difficult. In addition, store windows are full of cheap Chinese items that are of poor quality, while branded items cost a lot of money. After visiting a number of such stores, the question arises: why not sew or knit shoes for your pet with your own hands? Today on the Internet you can find a lot of options, patterns and patterns that will make your work easier. Shoe cutting plans for Yorkies and Chihuahuas are quite popular now, since small breeds of dogs are very vulnerable and suffer the most from cold and frost. If you love handicrafts, then you can crochet shoes. It all depends on your imagination and capabilities.

Warm and comfortable - knitted shoes

For those who don’t like or don’t know how to sew, there is another way to make dog shoes with your own hands - knit them. Typically, such accessories are used for home needs: after a bath or when there is a strong blow across the floor.

It will not be difficult to knit shoes for a dog in the form of regular socks or booties in the right size, especially since there are many videos on this topic on the Internet. Remember that the loops are knitted tightly and the threads hold their shape well (coarse, not scratchy).

It is clear that such an accessory is not suitable for the street; it requires improvement:

1. Make a waterproof sole. It is better to attach such an addition from the outside using a hook - in a column.
2. The inside of the boot can be insulated with fleece or felt. This is done both over the entire volume and only the insole and toe.
3. Knitted shoes are not suitable for long-haired pets because they electrify the pet's hair. To solve this problem, a silk or cotton lining is sewn in.

Materials for making shoes

You can easily sew shoes for your pet from your old clothes or unnecessary things that are lying around unnecessarily. All you need for this job is:

• fabric (it’s better to take a warm one);
• wide elastic band, which is used for a belt;
• Velcro or buttons;
• pieces of rubber for the sole;
• needles, threads.

The best fabric to use is fleece. This material dries quickly, is easy to work with, does not stretch and lasts a long time.

When getting started, first of all select and download the pattern. The sample will have to be adjusted to the size of your pet's paw. The paw pad should be measured with a centimeter and these dimensions should be transferred to paper.

DIY dog shoes

You must follow these instructions:

1. The finished pattern must be attached to the fabric, folded in two layers and outlined with a pencil or chalk.
2. Use scissors to cut out the part.
3. According to the diagram, we sew the rubber circle to the part. This will be the sole.
4. Also, according to the diagram, attach and sew Velcro, attaching an elastic band to it.
5. At the end of the elastic we sew the second part of the Velcro (on which there are hooks). You need to make sure that the hooks are facing in the right direction (down).
6. Next, the part must be folded so that the sole is inside. Then we sew the side part and the toe.
7. Turn the boot inside out. Ready!

It is worth paying attention to the fact that if the product is not made from fleece, then more fabric will be required for seam allowances, since the fabric may delaminate.

It is also worth considering the breed of dog for which the product is being sewn. If the animal has thin and long paws, the top of the product may need to be made longer.